Remixed lid for Blue Lowes Bucket

Remixed lid to fit one of the blue 5 gallon buckets from Lowes. Added grid pattern and ribs to the underside for strength. Removed lip from top side so the lid could be placed flat against the build plate and printed without any supports. Added ports for water and Power. Was able to reduce to 3 pieces if printing on a larger build plate like that on a Bambu X1.

Blue Lowes bucket pictured inside a larger planter as this will be kept indoors and I wanted to hide the 5 gal bucket with something a little nicer. 

Printed in ASA and with 4 walls for strength. 

Included test print for the center collar, the holes of rate water and power ports and the outer rim.

Remixed lid to fit one of the blue 5 gallon buckets from Lowes. Added grid pattern and ribs to the underside for strength. Removed lip from top side so the lid could be placed flat against the build plate and printed without any supports. Added ports for water and Power. Was able to reduce to 3 pieces if printing on a larger build plate like that on a Bambu X1.

Printed in ASA and with 4 walls for strength.