Monopoly Deal Card Box (MMU and single colour versions)

You can either use the step file (Move the lid 9mm down to contact the build plate) or the 3MF file to print with the logo in the correct position. Needs an MMU for multi-colour printing.

I've added the STLs for the base, Inner cardholder and latch (Print 2 latches).

Print either the 3MF for multi-colour or the single colour lid STL for single colour.

Needs 6x 30mm bolts to assemble. 

All components can be found in the STEP file for easier CAD tweaking.

The seal is only needed (print using TPU) if you want to try to make it waterproof.

I changed the box dimensions a little to better store the cards when they have been used so that they don't spill over the top of the card holder.

Now with single colour version for the logo.