Sound devices A20TX CLIP holder for Rycote PCS

PETG - for strength and flexibility in the clip

100% infill - for strength in the clip

Tree support for the clip + upper arc.

--

A20 is secured with 2 countersunk screws (2,5x8mm), remember to remove small Allen set screws first, there’s 1 extra hole on the side for an aditional 2,5x6mm screw, but shouldn’t be necessary.
 

Then it all snaps onto the lower, black part, of a Rycote Boom PSC.

Cable clips on the back, to hold the Sound Devices AC-BALXLR-4 cable, which can be shortened to approximately half the length

Its possible to change batteries while mounted.

Its also possible cover it all up with a thin small dry bag, which clips in as well, to protect against dust and rain. For example Sea to summit lightweight 1L.