Print your own mold housing at home and save money! You can use it to make a silicone moulds and cast your own art to sell. You can make two-part molds to cast custom dice of any shape and size. The durable plastic mold box is easy to use, making it the perfect tool for resin/epoxy enthusiasts and DIYers.
You will need to make 2 prints of a size to make one complete mold housing frame. The walls can be held together with binder clips. For larger molds I strongly suggest using hot glue.
SIZES:
- Inner Diameter: [Inches: 2, 3, 4 ][ Milimeters: 51, 76, 102]
- Heights: [ Inches: 2, 3, 4, ][ Milimeters: 51, 76, 102 ]
- Vertical Walls are min of 0.2in [5mm] thick
- Base is 1in [25mm] wide by 0.2in [5mm] thick
3D PRINTING SETTINGS:
Layer Height: 0.2mm
Top/Bottom Layers: 4
Perimeters: 3 or 4
Seam: Aligned
Infill: 15%-20% Gyroid or Grid Pattern
No Supports
Temperature settings are dependent on filament and printer
The author marked this model as their own original creation.