MGN12H Hotendmount

A Hotendmount for V6 Hotends on MGN12H Rails with a bowden system.

I desgined it because i couldn't find something with a sensormount for a M18 Z-sensor.

I added some holes for zipties to manage you cables.

The belt is mounted with some longer screws on the carriage and some zipties so you can adjust the hight to your needs.

Used it with a V6 and a Phaetus Dragon HF Hotend.

It is designed with thread inserts in mind for the Hotend clamp and the blower fan.

For the V6 Hotend I used the "Mistral 2.1" fanduct (https://www.thingiverse.com/thing:2121279)

With the Phaetus Dragon HF Hotend I used the short Version of the fanduct (https://www.thingiverse.com/thing:4009093)

You need the following change in your Software:

#define NOZZLE_TO_PROBE_OFFSET { 0, 64, 0 }

Complete Partlis:

1x Hotendmount (printed)

1x Hotendmount Clamp (printed)

4x M3 thread inserts

2x M3x20 Screws

2x M3x25 Screws

Maybe you need a little plate on the fan to reach your X-Endstop.

Hook me up if you want the 3D Model so you can make changes on your own.