Aqualung i550C Dive Computer inserts

Design based on the “Rugged Box (Parametric)” by Whity which was based on the "Tool box parametric" by Yanev and provided more options to parameterize it in Fusion 360.

Parametric Box was set at 145 x 135 mm, with a bottom of 60mm high and a lid of 20mm high.

Created the Lid and Bottom inserts to support an Aqualung i550C dive computer.

Printed using Bambu brand TPU, Layer Height = .25, Wall Loops = 1, Top Shell Layers = 2, Bottom Shell Layer = 1, 10% infill and Gyroid infill Pattern.