Typewriter M-Lok AFG
Description
PDFGet that St. Valentines Day vib….
Filament PLA+ or better
Layer Height .16mm
Walls 5+
Infill 25%+
Print the AFG upside down with supports. Use support blockers as the inside of the foregrip is semi-hollow.
Non-Printed Hardware Needed:
3x M5x10 Hex Socketed Machine Screw/Bolt
3x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Tags
Model origin
The user re-uploaded this model. The user is not the original author of the model.
