BabyApe 3 Pro Base for Runcam Thumb Pro

This camera mount works with all Runcam Thumb cameras and the original camera holder. The 2 screws in the back are the original screws, whereas the one in the front is a spare M2 with a self locking nut. Best to remove the top plate of the drone before mounting this screw to have good access.

With this mount the camera is a couple mm higher than the original mount, which allows the battery to be moved slightly further to the front and allows a steeper camera angle.

Printing in TPU will be to soft and unstable. I would recommend PETG, PLA or ASA.

Print Settings

Printer Brand:

Sovol 3D

Printer:

Sovol SV05

Rafts:

No

Supports:

No

Resolution:

0,2

Infill:

100%

Filament: eSun PETG black