Cutting Board Mount

I wanted to hang a large cutting board that we received for christmas. I decided that hanging on the end of our cabinets was a good spot so I designed this harger that would fit in the slot. For strength I used three wood screws in hidden galleries and used the “snap” connectors in the cut tool to print in two pieces. The red line shows where I cut the model in the slicer. I used two snap connectors that were size 5mm and 7mm deep. The cut was at a height of 28mm.

I've included the CAD file and STEP so you can remix for your needs. The 3mf file with PROJECT in the name has the slicer project.

I used PLA, maybe ASA or ABS would be ok.