Pro Finger Scooter

Behold the marvelous wonder, of a pocket-sized professional scooter.

INFORMATION: 

 The print in place function is there for all parts of the toy with the exception of the bars and wheels. (These will require a separate print or add them beside your scooter.)

Anyone with a fairly dialed in printer (I use a Ender3) should have no trouble with the print in place version, but separate files for each part are there if needed. 

ASSEMBLY:

• a drop of super glue for the bars
• For the axles use two small clippings of 1.75mm diameter filament.
• if you have any issues a 5/64 drill bit through the wheels should help

PRINT:

Refer to image for placement.

• Support- yes, on build plate only
• Brim- yes only for bars and wheels + more if doing individual.
• Infill- 15% Cubic
• Layer- 0.16mm
• Perimeters- 3
• Random seam position