This is a small Bookend with some fancy AI-generated supports.
Printing:
-0.4mm nozzle
-2-3 Walls with 0% Infill (If you want use Infill to your liking - it should not be necessary)
-Layer-height: 0.2mm works fine, use 0.24 to speed up the printing, or use a bigger nozzle
Print with the bottom down as shown in the picture. This is theoretically the wrong direction for mechanical strenght, but ensures good looking tree-supports. It is strong enough like this, even when using silk-PLA.
Enjoy!
The author marked this model as their own original creation.
