Ornament Lithophane

Elevate your holiday decor with a personalized touch! 3D-printed lithophane ornament, beautifully illuminated by your trees LED lights. Christmas magic in every detail

I used https://tool.itslitho.com/CreateModel to create my lithophane. Choose a circle for the shape of the lithophane and keep it at 100mm until it is placed in your slicer which is where you will scale down to 69-69.5mm (69-69.5%) I used 69mm and the model was slightly loose, so I ended up super gluing it in.

----------------------------------------------------------------------------------------------------------------

My Print settings:

PLA

Printer: Ender 3 Pro

Layer Height: 0.2

----------------------------------------------------------------------------------------------------------------

Per Lithophane settings:

SCALE TO 69-69.5mm (do this in your slicer as it is more accurate than using the slider on the lithophane maker)

Supports: Yes

Infill: 0%

PRINT VERTICALLY

(Note: added the lithophane pictured for test prints.)

----------------------------------------------------------------------------------------------------------------

Per Orniment Settings

Supports: Yes

Infill: 20%

(Note: Add a support blocker at the loop on the top of the ornament, as that piece is thin)

----------------------------------------------------------------------------------------------------------------Additional Notes:

I encourage other makers to do their own remixes. Some ideas for these could be adding in a completely open back to let more light in if the tree does not have LED's on it, or before attaching the lithophane putting battery powered LED's inside to make the lithophane stand out more.