Prusa MK4 feet (released V2)

Prusa MK4 feet's

V2

Changelog

• increased stability and contact surface
• 100% infill to reduce springing and transmission selects

Print settings

• material: Prusament PETG
• layer height: 0.2mm
• infill: 100%

V1 

Print settings

• material: Prusament PETG
• layer height: 0.2mm
• infill: 25% cubic

Montage

!For V2, position the feet so that the extended surface of the base faces away from the printer!

1. Insert the foot into the profile from the inside of the printer.
2. Turn the foot and click into the profile.

Place the feet in the corners of the printer frame. Make sure all the feet are correctly inserted into the profile before you start printing! 

I hope this feature will help you increase the stability of your printer. Please share your makes and comments.

Happy printing!