Mechanical clock with various options and easy assembley.
HARDWARE:
2 pcs 5x5x5mm square magnets - for CLOCK BASE
2 pcs 10x2mm round magnets - for CLOCK PLATE (NOTE: CHECK POLARITY BEFORE GLUING)
simple clock mechanism
Filament- PLA
Layer height- 0.2mm ,5 up, 4 down
perimeter - 2
Infill - 15% Grid
1 pcs clock base+plate
4 YELLOW pcs hexa-shelf (to represent the numbers 12,3,6,9)
8 BLACK pcs hexa-shelf (to represent the other numbers and frame)
6 WHITE pcs hexa-shelf for the center
1 pcs wall mount B ( A is for out side hanging)
45 pcs clips
The assembly is easy- arrange the hexa-shelf as the picture and push the clip to the slot.
the wall mount works great with one screw. if you intend to put heavier thing you shold put 2 wall mount
The author hasn't provided the model origin yet.