Drills that fit: 2mm 2,5mm 3mm 3,5mm 4mm 4,5mm 5mm 5,5mm 6mm 6,5mm 7mm 7,5mm 8mm
You need certain lengths of the drill so that it fits perfectly and evenly into the drill box. I have made a chart with all my drill lengths and their diameters so you can check you’re drills if they fit before you print my design!
Materials needed for assembly: 2x M3x20 screws (Allen)
Here are some tips for printing:
Quality | 0.16 or 0.15 mm |
Wall loops | 3 |
Infill | 50% |
You can use any filament you want. Except for the spacer. For this you need a slightly more elastic filament. You can also use normal PLA. I made mine out of PLA.
Please make sure that you switch on Detect thin walls!!
No support structures are required for all models!
For the drill bracket and spacer you need a brim!!!!!
For the underside, hook and the lid you don't need a brim!
Here is a video link for assembly:
The author marked this model as their own original creation.