After I gave my Tenlog TL-D3 Pro the 32bit motherboard and, according to Tenlog, a different screen is also necessary, I bought the TJC4827x243 without first checking what kind of screen my printer has. Of course, the new screen no longer fit into the case at the front or back. So a new housing was needed. Since I wanted to have the Micro SD card slot freely accessible - I'm not keen on SD card extensions - I decided on this variant that you see here.
Addendum: an intermediate frame to raise the display, now you can also access the microSD card. The extender is screwed onto the adapter plate (part 1). Screws M3x8
Part 2 V2 is screwed to the extender with the display. Screws M3x10 or M3x12
Part 3 V2, a little flatter and the screen section has been enlarged.
*Screw size M3
The author marked this model as their own original creation.