Breville Bambino espresso maker tray/organizer

I wanted a way to better organize a few accessories on my Breville Bambino espresso machine. This tray is perfectly sized to the top area (with 1mm of wiggle room to allow for production model variation).  It is designed to hold two 53mm tampers - the one the machine comes with and an optional second leveler/tamper. It also holds a 63mm portafilter basket to allow you to have a second basket close at hand.  It will also fit the slightly wider Bambino Plus model, but it will leave a little empty margin on the left and right.

Highly recommended to print in TPU/Flex materials.  This helps reduce machine vibration, and will snugly hold the 2 smaller tools in place as a press fit.  My example pictures are shown with transparent TPU.

Sliced at 0.25mm works well, and for any semi-transparent materials, I highly recommend using 30% infill with the Triangles pattern.  My 3MF below is setup this way for my XL. I should mention that this printed quite cleanly in TPU with my 0.6mm nozzle, so I would expect even cleaner results from a 0.4.