Fastener for NorcoT Creality K1 Max Glass Lid Raiser (with Sliding Vents)
Fastener for lid raiser made by Tony F for the Creality K1 Max printer.
71
546
9
2729
updated December 29, 2023
Summary
PDFFastener for lid raiser made by Tony F for the Creality K1 Max printer.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
The NorcoT Creality K1 Max Glass Lid Raiser (with Sliding Vents) is the best I've seen so far!
But I found that it didn't hold in place very well, because it was just placed on the K1 max without a fastener.
I created a jaw system to modify the corners.
You can see the pictures.
You'll find a v3 corner.
And for those who have already printed the v2 corners, I've made a complementary piece to glue on with two drops of cyanoacrylate glue (super glue).
It's the same movable jaw for both versions.
The additional materials required are 4 M4x20 or M4x25 bolts and 4 M4 nuts.
There's no need to screw too tightly - just enough to stop it moving!
To be printed in PETG, 0.4mm nozzle, 0.2mm layer thickness.