Remixed Polaroid Frame with Nail Hole
A sleek Polaroid frame following the original design, now with a nail hole to hang it on your wall and more improvements
6
60
0
240
updated April 1, 2024
Description
PDFAn upgraded version of Deluxe Designs Polaroid frame, which features a nail hole of 5mm so you can hang it on a wall. The Polaroid slides in from the top and is centered by the frame.
The frame works for the Polaroid 600 film and all films with the same dimensions.
Print Settings
- Any filament should work fine :)
- VERY GOOD LAYER ADHESION IS REQUIRED!
- Two perimeters should be sufficient, ~10% infill worked well for me.
- Depending on how good your printer handles bridging, I recommend tree support for the “window”.
Please consider liking and posting a make if you find this useful 🙂
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
The original model did not feature a nail hole to hang the frame on the wall. This model fixed that.
Furthermore, the inside part holding the Polaroid picture in place was larger than the slot, so the Polaroid had some slop and didn't sit properly aligned and straight in the frame. Now the inner part has the same dimensions as the slot so the Polaroid sits snugly.
