A small house that fits neatly over Brome SquirrelBuster Pole Adapter Model 1025.
I was having problems with Pigeons taking over my yard but I still wanted to feed smaller birds with a handful of nuts or sunflowers. This lets me put a handful of food out without getting a massive swarm of larger birds.
It slides right over the adapter attachment. The Brome adapter fits on a standard bird pole. See their webpage for more info: https://bromebirdcare.com/squirrelbuster-pole-adapter/
Small drain holes in the bottom of the floor allow for drainage without letting the food fall through. Assembly:
Print the floor x1
Print the roof x1 Dry fit first. Shouldn't need much sanding but sand to taste.
Put a drop of crazy glue on the end of the risers and assemble.
Glue the roof to the ceiling being very careful to align properly before droping the roof onto the ceiling. The glue will dry super fast with all that surface area.
You can use a magic marker or weather proof paint to color the letters if you want. Careful doing that so it doesn't bleed and make a mess.
Load up your food and put it out!
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
15
Filament:
Hatchbox PETG Orange and black
Notes:
I printed in PETG which makes it stronger and should hold up better in very hot weather and the elements.
By design, the pole adapter provides additional structural strewth. When it is off the adapter, don't apply a lot of pressure to the topside.
Category: Outdoor & Garden
The author marked this model as their own original creation. Imported from Thingiverse.