Iguana Painting

Created using self-written scripts (js, python, AI) for image rendering and 3d mesh generation.

It is better to use non-glossy plastic. You can also lower the temperature for a matte finish.
After the first layer, you can lower the flow_rate to even out and eliminate all overextrusions.

First layer height 0.20mm then 0.08mm for all other.

Filament color:
0 - black
9 - violet
12 - red
13 - blue
16 - green
19 - lime
22 - purple
24 - beige
28 - white-phosphorescent

Rafts: No
Supports: No
Resolution: 0.08 (first layer: 0.2)
Infill: 100%

210 x 210 x 3mm ~ 10hours

105 x 105 x 3mm (50% x 50% x 100%) ~ 4 hours

Photo:

Other works: