POE Splitter Screw Mount Wall Holder (optional DIN rail bracket)

A small variation to https://www.printables.com/model/60698-poe-splitter-screw-mount-wall-holder so that the 52.5mm DIN bracket from https://www.printables.com/model/420009-din-rail-bracket-heat-insert-version-525mm-625mm can be used to mount it on a DIN rail.

While that requires a few extra parts (screws, heat set inserts), it's a much easier print than the DIN rail version of this I uploaded at https://www.printables.com/model/60703-poe-splitter-din-rail-holder.

I will upload the f3d files (etc) later on.

---

Designed to be a wallmount for the "DSLRKit PoE Splitter", available from https://www.aliexpress.com/item/32829719175.html, but also eBay, Amazon. There seems to be (at least on Amazon and AliExpress) a few different vendors supplying the same device under different brands too.

And as they come with various connection forms, I've used these for powering various generations of Raspberry Pi's, small routers, “internet bridges” and similar.

Was originally created for me by https://www.fiverr.com/markusgiesler as https://www.printables.com/model/60698-poe-splitter-screw-mount-wall-holder.

Design originally inspired by https://www.thingiverse.com/thing:4080914.

Print standing up on the baseplate, with the “lip” down.

Moved the hole positions very slightly, and made slightly smaller to match the screw size for https://www.printables.com/model/420009-din-rail-bracket-heat-insert-version-525mm-625mm