BLTouch compatible Sprite Extruder Pro Shroud

A replacement shroud.
13
146
0
621
updated December 24, 2023

Description

PDF

The original shroud only works with the CR Touch sensor (screw you creality), this one replaces it and raises the mounting by 4mm to fit the BLTouch as well. This is a “remix” of this cad design, big thanks for letting me use it link. To mount it you have to dissasemble the extruder, there are teardowns online, and put the new one in. The BLTouch is mounted with 12mm M3 screws and nuts.

I'm honestly unsure what material is best. I printed it with PLA and it has been working perfectly, but at the same time the plastic is quite close to the hot extruder so something like ASA or ABS may be necessary long term.

The only potential drawback of this design is that you have to screw the m2 cable mount screws into the plastic directly - unless you have M2 inserts, in which case I provided step files as well so the holes can be adjusted. But I personally didn't think it necessary, and it has been working well for many hours of printing.

Model origin

The author remixed this model.

Differences of the remix compared to the original

Raised the probe mounts to fit BLTouch.

License