"Gen 7" Board game Organizer

Notes

• Each file ending with an x2 (or x5 or x6) has to be printed 2 (or 5 or 6) times
• The game box will only almost close completely.

Description of each file

• LegacyCards1-Box
  Used to store the legacy cards “B” to “Ci”. The “B” on the front indicates where to start the filling.
• LegacyCards1-Lid
  The Lid for LegacyCards1-Box
• LegacyCards2-Box
  Used to store the legacy cards “Ta” to “Xe”. If you don't have the BP (“Breaking Point”) expansion, You wont have Legacy Cards “Te” or “Xe”. The “T” on the Front indicates where to start the filling.
• Trash
  During the campaign, you are instructed to remove cards from the game, so they won't appear in the campaign again. You can throw such cards in this. You only need to throw cards in it which are marked as starting cards (Those have an “START” in one corner).
  During the setup for the first episode, you assign each player a relationship. Put all relationship cards, that are not assigned to a player in it too. You won't need them during campaign.
  When you need to remove a legacy card from game, just put it back to the LegacyCards box.
• BoardsHolder
  This is used to prevent some material to play around the box. For better print quality print this with a brim.
• Dice-Box x6
  Each barrack has its own set of colors and some markers. Use this box for each barrack dices and markers. You can use this boxes to assign each player a random barrack.
  Notes:
  • The Cybernetics (Color: purple) has only 4 six sides dice. But there is an yellow-ish dice in the game. You can put that one to the purple dice.
  • There are some white dice. When not playing the competitive scenario, (BP expansion) don't use this box to assign a barrack to a player. In the normal campaign, the purpose of these will be revealed at some point in the campaign.
  • Without the BP expansion, for white there are no markers.
  • Without the BP expansion, there are no red dice or markers, so one box will be empty
  • When the BP expansion is present, there is a white D12, which is not used during the normal campaign.
• Dice-Lid x6
  The lids for Dice-Lid x6
• PlayerCards-Box x6
  During the campaign a player might collect some cards or perks. You can use these boxes to store them for each player. A player can be identified by its relationship. You can also put a small paper with the player names in it. You can also put the splotlight marker for the next episode in it. When storing, make sure, the relationship card is at the top.
• PlayerCards-Lid x6
  The lids for the PlayerCards-Lid x6
• Markers-Box x6
  Used to store the system-status markers and game related markers (Leader, Round, Logic/Instinct and spotlight). Initially two on them will have no use. During the campaign, these might get a use.
• Markers-Lid x6
  The lids for Markers-Box x6
• Cards x2
  Used to store cards during the campaign. Here all the active cards are stored. The re enough slots for all possible kinds of cards (Put relationships, personal target, episode targets and rule cards into one common slot.
• Perks-Box x5
  Used to store the perks, that were not purchased. Split them by its costs.
• Perks-Lid x5
  The lids for the Perks-Box x5
• Resources-Box x6
  Those are used to store the resources, there are 3 kind of them with two quantities of each.
• Resources-Lid x6
  The lids for the Resources-Box x6. Please not that the boxes are almost square. So the lid will only fit in one direction, but not the other.

Assembly:

1. Put the LegacyCards1-Box and LegacyCards2-Box with its lids in the bottom-right corner
2. Put the Trash into the top-right corner and the Cards x2 into the bottom-left corner
3. Put the BoardsHolder between Cards and the LegacyCard boxes. Note that the BoardsHolder has cuts on the shorter sides. Make sure the cuts are facing down.
4. Place the 6 Markers-Box in the top left corner. You have to place the the lids on the side.
   Place 3 next to each other and the last 3 on top of the other three.
5. Player the 6 Dice-Box between the Markers-Box and Trash/LegacyCards-Box. Maker sure all Dice-Box are placed on the top side of the game-box and are not using the cuts from the BoardsHolder. Put 3 next to each other and the other 3 on top of the other 3.
6. Place the 6 Resources-Box in a 3x2 grid on top of the 6 Dice-Box. Note the Resources-Box are not square and there son only on direction, they will fit.
7. Place the 6 PlayerCards-Box in the BoardsHolder. You will have to make  use of the cuts from the BoardsHolder. First place the top and the bottom PlayerCards-Box using the cuts and then the middle PlayerCards-Box. Repeat this for the remaining 3 PlayerCards-Box.
8. Insert the long boards from the game (the sections of the ship). You can put all boards that are currently in use or have been overridden during the campaign.
9. Place the 5 Perks-Box on top of the long boards
10. Place the shorter boards and small envelopes on top of the Perks-Box. Again you can place all the boards that are currently available or override during the campaign.
11. If there is no campaign in progress, you can place the reading marker on top of the Cards.
12. Put the two big boards in the top-right corner
13. Put the rest of the games material in any order. Hint: the campaign book is a ring-book. To avoid stress on the rings as much as possible. try to place is vertically in the middle as possible.

You can use the images to orientation.