This is a Door Handle for a Railcore II 300ZLT using a large single door. I wanted a simple magnet/latch solution for the door. Using the parts I had laying around I came up with this solution.
Parts needed:
3 - M3x12mm Socket cap screws, a button head may work.
2 - M3x16mm button head screws
5 - M3 nuts
1 - Magnet 12mm diameter (.472 in) by 3mm (.118 in) Thick
1 - Common box opener/sheet rock knife blade (metal used with magnet)
Created in Fusion360
Printer:
Railcore
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
20%
Filament: Atomic PETG Dark Cherry Red
Category: 3D Printer Parts
The author marked this model as their own original creation. Imported from Thingiverse.