The other reviewers who give this design five stars should have higher standards for 3d printed designs. I gave myself cramps lasting several minutes trying to screw in my cap. It is possible to 3D print threads that work off the build plate without the type of post processing recommended in these instructions. The designer could have added an offset to their threads, and they didn't. If I needed another sd card holder, I would choose one with properly offset threads.

After post-processing, it's a fine design. Very similar to another sd card holder I printed many years ago. The poorly offset threads makes me avoid recommending this part, unfortunately.

18

Tom

@TomSchoenlau

@NicholasGower_479395 The offset is 0.2mm. The grind in is meant to be for residue from printing. If you can't get it screwed on, than get your printer calibrated! (edited)