2 In 1 Themed Diorama Stack (for Hot Wheels & 1/64 Scale)

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068

Custom display base is also available from $5! Contact me to discuss what you want!

If you like my work, consider support me through Patreon: https://www.patreon.com/gigapenguin3dprints/posts

Description

Simple 2 in 1 diorama design with a garage and tunnel design, it comes with a bunch of cool features: 

• Fit up 5 cars per level
• Large base for storing batteries and easy access switch
• Fit in double Funko Pop protector box for easy storage (Limit to 2 diorama)
• The number of diorama can be stack up endlessly too (If not using double Funko Pop protector)

Checkout my showcase video: 

This diorama is capable to be built as high as your choice: 

The diorama is separated into multiple parts for easy printing. All files are packed into a zip file and arranged in folder as follow:

1) Base:

• Base Block - Yellow
• Battery Drawer - Yellow

2) Garage Walls:

• Arch - Grey
• Back Wall - Garage - Multi Colour
• Base - Teal
• Flat Base - Tiles - Multi Colour
• Pillar - Teal - Print x2
• Side Wall - Garage - Multi Colour - Print x2

3) Tunnel Walls:

• Back Wall - Tunnel - Multi Colour
• Flat Base - Road - Multi Colour
• Pillar - Grey - Print x2
• Railing - Black
• Side Wall - Tunnel - Multi Colour - Print x2
• Upper - Grey

4) Top Cover:

• Railing2 - Black
• Top Cover - Grey

5) Garage Props (Optional):

• Cooler - Blue
• DynoRig - Full - Blue
• DynoRig - Half - Blue
• GarageBox3 - Red
• GarageBox4 - Red
• Locker - Green
• New Shelf - Green
• RimRack (Unused)
• Roller - Silver

6) Extras (Optional):

• ButtonCover - Blue
• TunnelEndArt.pdf

Print Settings (Tunnel)

Nozzle size = 0.4 mm 
Layer height = 0.2 mm

Filament change layer for colours on "Flat Base - Road - Multi Colour":
1) Start (Road lines colour, mine is in yellow)
2) Layer 5 (Overall road colour, mine is in black)

Filament change layer for colours on "Back Wall - Tunnel - Multi Colour":
1) Start (Gap lines colour, mine is in black)
2) Layer 6 (Overall wall colour, mine is in white)
3) Layer 11 (Divider colour, mine is in grey)

Filament change layer for colours on "Side Wall - Tunnel - Multi Colour - Print x2":
1) Start (Gap lines colour, mine is in black)
2) Layer 6 (Overall wall colour, mine is in white)
3) Layer 8 (Arch colour, mine is in grey)

Print Settings (Garage)

Nozzle size = 0.4 mm 
Layer height = 0.2 mm

Filament change layer for colours on "Flat Base - Tiles - Multi Colour":
1) Start (Gap lines colour, mine is in black)
2) Layer 5 (Overall tiles colour, mine is in Silver)

Filament change layer for colours on "Back Wall - Garage - Multi Colour":
1) Start (Door colour, mine is in silver)
2) Layer 5 (Overall wall colour, mine is in white)
3) Layer 11 (Wall lines colour, mine is in teal)

Filament change layer for colours on "Side Wall - Garage - Multi Colour - Print x2":
1) Start (Overall wall colour, mine is in white)
2) Layer 8 (Wall lines colour, mine is in teal)

Assembly (Based on my photos build)

The car is just placed on the diorama, there are no holes to tie the cars down by wire.

It is recommended to use glue for the pillars and walls to ensure the build is rigid. 

Check out my assembly video to give you a better idea on how the build supposed to go: 

Others

Feel free to send me any feedback on how to improve the design. Suggestion on display base designs is welcomed too.

I can be contacted through Instagram or Twitter too:

Facebook: https://www.facebook.com/groups/1115757609295068
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/

Custom display base designs are available from $5! Contact me to discuss what you want!