Elecrow 7 inch LCD Display Feet

One of the acrylic feet broke on my display so I created replacements that you can print. I made these slightly longer and made the angle of tilt more acute than the originals. This is a 7inch touch screen that is compatible with many devices. I have a raspberry Pi4 attached to the back of mine for my 3D printer. Link below for the screen I have for reference.

Elecrow 7 inch LCD Display-H

https://www.amazon.com/ELECROW-Raspberry-Touchscreen-Capacitive-1024x600/dp/B08FMNDDSL/ref=sr_1_10?crid=1F9XRDXDU6CBH&keywords=elecrow%2B7%2Binch%2Blcd%2Bdisplay%2Bh&qid=1703396597&sprefix=elecrow%2B7%2Binch%2Blcd%2Bdisplay%2Bh%2Caps%2C81&sr=8-10&th=1

Printed with no supports.

PLA Filament

Screws were a little tight putting through the hole.