Ikea 365 lid for smal rectangular food container (180x120)

Model should be printed in PP!

Only for the brave!

I successfully printed this in Smartfil PP White. Using packing tape on the Bambu lab Engineering plate.

Adjusted a petg profile, 225*C, 70*C bed. 7mm3/s, 25-60% fan. Brim!, no cooling first 5 layers. Packing tape must be attached precise and around the corners.

You will need to use the original gasket. 

If you by chance have both PP and PP-GF in stock, use the GF material after the third layer or so to be the perfectionist not relying on a little bit of luck.