Articulated steady mount for "The Handy"

Designed as a favor to a friend, a more sturdy mount for hands free action with the Norwegian product called “The Handy”. 
Other designs seem to be too fragile or not rigid enough for the forces involved. The open bracket slot allows for a quick release with a couple twists.
Feedback has been very positive, dont have any pictures of the finished assembly at the time of publishing the design. 

Designed to screw on to or under a desk/table/whatever and be adjustable in position and angle. Use foam tape to interface against the device to ensure solid contact without damaging it, thickness of foam tape depends on the tension and fit of the printed part. 
Requires two m10 bolts of min 80mm length and two m10 nuts. Put a dab of glue onto the nuts/socket before tightening to keep them in place.
The quick release bracket can be mounted vertically as model screenshot shows, or more discreetly under a solid surface. 

For personal use only. Contact me if you want to print and sell, i wont charge much and ill perfect the design for you.