Gridfinity NUUN Tube Storage

A customizable storage and display solution for NUUN tubes.

https://github.com/stephaniebarrett/nuun-storage-bin

If you checkout/clone the repository and run the generate.sh script, you can specify options to customize the part. These are the same options available within the .scad file.

• -o arg The output path/filename.
• -x arg The number of Gridfinity bases along the x-axis. Default: 1.
• -y arg The number of Gridfinity bases along the y-axis. Default: 1.
• -z arg The bin height in number of 7mm increments. Default: 2.
• -s arg Style of the holes in the base (0: No holes, 1: Magnet holes only, 2: Magnet and screw holes; no printable slit, 3: Magnet and screw holes; with printable slit). Default: 0.
• -e arg Elevation of the tube into the base. Negative values will sink the tube into the bin, positive values are useless. Default: -10.
• -r arg Rotation of the tube; recommended rage is 0 - 20. Anything more will risk toppling over on smaller bases. Default: 15.
• -q arg Quality of the model's curves (32:Low, 64:Medium, 128:High, 256:Ultra). Default: 32

Alternatively, if you use the --all option, every combination from 1x1 0º to 5x5 20º in 5º increments will be created in a separate process (very CPU and memory intensive) using main.scad and all other parameters will be ignored.

Prusa i3MK3S+

• 0.6mm nozzle
• 0.4mm layer height
• Recycled filaments.ca PETG

I'm using Gridfinity Rebuilt in OpenSCAD as a library to create customized Gridfinity bins.