Hettich MultiTech Drawer Front Fixing Bracket

Replacement bracket for Hettich's MultiTech drawer system.

Part numbers: 08855, 08856, 08857 and 08858.

Includes:

• 1 left and 1 right-side brackets;
• 1 left and 1 right-side clamps.

Installation of the printed brackets requires 4× flat-head (countersunk) M4×10 (#10×3/8) self-tapping screws.

The screws required to mount the bracket to the front plate can be reused from an existing installation.

High infill (> 50%) and/or wide walls (> 1mm) are required for maximum strength and to give the screws something to bite in.

Easy to print and requires no supports.

Using a material with a low coefficient of thermal expansion such as PLA or PETG is highly recommended.

This is the right-side version. Simply flip in your slicer for the left-side one.

An improved, stronger version is available:

• As a pre-printed kit:
  • Heftware (discounted price): https://bit.ly/43bq5Qx
  • Etsy: https://www.etsy.com/listing/1395651496
  • Ebay: https://www.ebay.com/itm/386254462287
  • Ebay (Canada): https://www.ebay.ca/itm/386254462287
  • Ebay (Australia): https://www.ebay.com.au/itm/386254462287
  • Amazon (US): https://www.amazon.com/dp/B0C3L3KFCB
  • Amazon (Canada): https://www.amazon.ca/dp/B0C3KY3ZNV
  • Amazon (Australia): https://www.amazon.com.au/dp/B0C3LJH97Q
• As a digital download:
  • https://www.printables.com/model/689488-hettich-multitech-drawer-front-fixing-bracket

Print Settings

Supports:

No

Infill: 

50%

Category: Replacement Parts