Split Flap Display USB Type C Power

This remix allows the split flap display by David Kingsman to be powered by USB C.

To use this, you will need an additional part: Type-C QC AFC PD2.0 PD3.0 to DC Fast Charge Decoy Trigger (or similar). Make sure the DIP switches are set correctly for 12 V (on off on).

You will of course also need a USB wall adapter that is capable of supplying enough power for your number of split flap units (about 21W for 10 units).

Use 2 M2x4mm screws to attach the board to the back cover housing (same screws as for mounting the hall effect sensors).

This remix allows the split flap display by David Kingsman to be powered by USB C.