This is a version of door handles for an ikea lack enclosure that includes insertion slots for 10mm x 2mm magnets, and microswitches for “door open” sensors. I was using 2.5mm plexiglass for my enclosure, so that is what these are sized for. At some point I will try to re-size and upload 3mm versions, so, add a comment if you are in need to motivate me.
Parts list:
2 x Microswitches: https://www.amazon.ca/gp/product/B06XMQG4TC
4 x Magnets (10mm x 2mm round): https://www.amazon.ca/LOVIMAG-Refrigerator-Magnets-100-Piece/dp/B0753ZPBLQ
4 x Screws (m2 x 8mm): TBD
Notes / Instructions:
The author remixed this model.