2 State flick sign

made on the same concept, remodelled to have looser tolerances so it can be flicked with peak aggression. slightly bigger diameter and the  base has holes for mid print inserted magnets. you could simply extrude cut out the words and re extrude different ones for different applications.

0.1mm clearance between snap together features worked well, would not recommend seam in in any of the mating areas, try to place them on the outer diameter of the ring if possible.

I printed with 0 issues on a Prusa Mini + with input shaper and 0.1 layer height, in PLA.

make sure to insert a colour change if you intend to insert magnets as there is a thin wall on the back so the magnet is completely concealed.

made on the same concept, remodelled to have looser tolerances so it can be flicked with peak aggression. slightly bigger diameter and the  base has holes for mid print inserted magnets. you could simply extrude cut out the words and re extrude different ones for different applications.

I printed with 0 issues on a Prusa Mini + with input shaper and 0.1 layer height in PLA.

make sure to insert a colour change if you intend to insert magnets as there is a thin wall on the back so the magnet is completely concealed.