Dice Throne Battle Tray

This battle tray is designed to organize all the components for your Dice Throne Characters while you play! I made room for card sleeves and the geekup bits. It also works if you don't have geekup bits or card sleeves too. I used Sleeveking sleeves specifically for this. Includes a dice tray with a nice fitted spot for all your dice, a token cup with fitted grooves to place your active tokens (no need to have them sliding around on your player board!), and a fitted spot for your health dial and combat point dial. You can either have your health dial and combat point tracker lying down or standing upright. 

This makes it so you can have everything organized on the table or play with this tray on your lap while sitting on the couch. My wife and I regularly have couch throne matches now! 

I bought some adhesive felt from amazon and used the felt stencil that comes with these files to cut it out to the perfect size and stuck it to the bottom of the dice tray. This makes the dice roll smoother and more quietly. Here's the link to the nice felt I used in my trays

 https://www.amazon.com/dp/B0BMWY4P5F?ref=ppx_yo2ov_dt_b_product_details&th=1

You can use any felt or neoprene you like, though.

I cut the whole tray into 6 pieces that my bambu p1p could print. The biggest piece is around 189mm. I used Loctite super glue and/ or e6000, which both work well. Loctite dries and cures faster. I used a couple of clamps when I was gluing the pieces together, but before that, I was just using heavy objects and pushing them up against the wall. Whatever you have on hand will work. 

Finally, make sure to hit the like button and post a picture of your make when you've finished putting it together! I want to see what color combinations you guys can come up with and see them in action! 

Make sure to follow my board game journey on Instagram @beticboardgaming. This is where I post new designs and do board game giveaways and reviews.

Edit: I took the dowels off of the model because they didn't actually transfer over with the STL export. Everything still glues together perfectly fine without them but you just have to make sure you line everything up nicely before you put the clamps on!