Tenlog Extruder Cable Management Holders

Updated (04/10/21) - REDESIGNED and added the Filament Guides on the sides and also made two screw holes (one on each side).

I wanted to better manage the Tenlog Extruder cables so I designed this cable holder.

I used M3 x 12 machine screws and M3 T-Nuts to mount this to the gantry, one on each side. The middle hole could be used but not necessary.

I used Tree supports to print. They broke right off after print and the print turned out great!

Enjoy!

Print Settings

Printer:

Tenlog TL-D3 Pro

Rafts:

No

Supports:

Yes

Resolution:

0.20

Infill:

25%

Filament:

Iron Red