Check out Prusa's Black Friday Deals. Only valid until December 3rd!

Horse Yoyo - ThemeYoyo - Customizable Yoyo

Yoyo with Themes - This Theme: HORSE :)
7
54
0
508
updated October 31, 2022

Description

PDF

This is a Yoyo with a horse on one side and a horseshoe on the other. 

More Themes and the OpenSCAD file can be found in my github repo:

https://github.com/andimoto/theme-yoyo

Note: printing takes about 12 hours on Prusa Mini (with Ironing). It is very easy to design your own Yoyo with a custom graphic on it!! Just checkout the repository.

Update 30. Okt. 2022: Added new YoyoBase Model for support-less printing

Printing

  • print ThemeBase on flat surface (graphic up)
  • do color change at the graphic to separate it from background
  • enable ironing on top layers the get a nice finish
  • print resolution 0.1mm
  • use PETG for stronger parts (of course PLA is also possible)
  • no Supports needed for YoyoBase

Parts

  • printed YoYo Parts (2x yoyoBase_xmm.stl, 2x YoyoThemeX.stl)
  • one M3x20 screw with M3 nut for Axis
  • 8 M3x6 screws (cylinder head screw)
  • 2 O-Rings 15x2.5mm
  • R188KK Bearing
  • Cord (there are ready Yoyo Cords, relatively cheap)

Assembling

  • place the bearing onto the center of the yoyo base
  • place the o-ring in both yoyo bases
  • put both yoyo bases together (may be necessary to press them carefully together)
  • they should be holded together by the bearing
  • screw both yoyo bases together with the M3x20 screw (do not overthight the axis)
  • screw the theme parts on top of each base carefully (do not overthight them)
  • tip: measure the weigth of the theme parts and balance them out with small parts of filament which you can place into the furrow/gouge which are extra made for weigth balancing
  • maybe the yoyo needs to be used some minutes

Tags



Model origin

The author marked this model as their own original creation.

License