Riser Feet for Fractal Design Ridge PC Case

Riser feet for the Fractal Design Ridge SFFPC Case in vertical configuration. 

Bottom of the case is 30mm off the desk increasing airflow. 

This uses the standard mounting holes for the vertical format which is a 4mmID & 55mm spacing incase anyone wants to design their own version. 

08/01/2025 Update:

2nd version of the original stand included with holes sized 2.7mm to directly thread into plastic

Found as “FD Ridge Feet (no heat inserts)” as requested by @tscan89_135115

Printed in eSun Matte Black PLA 

0.2mm layer height

40% triangle infill

5 walls

4 top and bottom layers

These are my go to slicer settings for any structural parts and these feet feel more than strong enough to support the almost 9kg of PC.

You will need:

4pcs M3x(6-8mm) BHCS or SHCS 

4pcs M3 4x5mm heatset inserts (if using the heat insert version)