Ender 3 v2 Neo drawer octopi mount & tools

Patreon - https://patreon.com/CosmicNimbusPrinting
Cults3D - https://cults3d.com/en/users/CosmicNimbus

Hi Ender 3 v2 / Neo user !

This is a remix of an Ender 3 v2 drawer from thingiverse. I've given the drawer back a section on the right for tools and nozzles and such, so it can be used as a drawer again! I emptied the drawer mostly before taking photos to show the space

I've also added 2 holes in the front (on the left side) for the pi's power and camera connection. I have my pi now connected to the PSU with a buck converter (to dial down to 5v), but I was running the stock raspberrypi4 powersupply through the hole at the beginning. You can do this too, but you will need a 90 degree angle USB C adaptor for the plug to fit - I just ordered a cheap one online.

There are a few errors in the model, but Cura does a good job cleaning this up.

NOTE: Print this in PETG so it is not a fire risk, PLA is flamable.

Happy Printing ! <)

• Moved pi mount to the left
• Removed Buck converter mount points
• Opened up a section on the right for tools / nozzles / etc
• Hole in front for pi camera cable
• Hole in front for power cable
• I also removed the fan vent and changes up the peripherals opening