Monitor Stand Cap with Accessory Mount

Easily attach a light, ball head, or any accessory with a ¼" mount to the top of your monitor stand with this monitor stand cap.

Specs

• Monitor Post O/D
  • This is designed to fit a monitor post with an outer diameter of 35.5mm.
    • This is a typical post size, but it is not “universal” as post size varies by manufacturer.
• Max-Carrying Capacity
  • It was tested with 8-ish lbs. I have used the light setup as pictured for around a week, and it has held just fine. YMMV.
• Hardware Required
  • Back of mount: M5 x 8mm **CAREFUL NOT TO OVERTIGHTEN**
  • Cap: ¼" tripod screw (designed with ¼" x 1" bolts in mind)
• Print Settings
  • Mine was printed in Jessie PLA at .20mm layers with 15% infill and supports for the threaded hole.
• *Accessories (Not required, but as pictured)
  • Extra-tall Monitor Mount

Affiliate Link Disclaimer

*These links contain an affiliate link for me. This costs you nothing and helps support me.