This is a holder we designed to hold the first aid kit from Aldi ("KZF-Verbandtasche"). It consists of three different files to print four parts: two side walls (you have to flip one in the slicer), one front, and a bottom. The parts are connected with a dovetail joint and glue.
The parts are to be printed with a layer height of 0.2mm. The red cross and the red dovetails can be achieved by changing the filament at the right height. There is no need for supports
The easiest way to mount the holder is by attaching the front after mounting the other parts to the wall.
The author marked this model as their own original creation.