New & Improved Version - https://www.prusaprinters.org/prints/137100-improved-universal-phone-bike-mount-v2
Simple Phone Mount for my Specialized Crosstrails bike. I wanted something that would attach to the center of the steering wheel and hold my phone stable for navigation.
The only additional hardware needed with this design are the following:
Two M3 Nuts I added some electrical tape on the bike for a more snug fit.
My bike has a 35 MM beam with ~20 mm of clearance below it. This only needs 10mm of clearance.
I have attached the design files if you would like to adjust the parameters.
The pieces are calibrated to my Ender 3 Pro meaning that depending on the accuracy of your printer you may have to post process the joints.
If you print this or remix this design, I would love to see your makes and remixes.
-Vedansh
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.12 (w/ Variable Layer Height)
Infill:
35%
Filament:
ESun PLA + Black
Notes:
I would advise using 0.1 to 0.16 layer height with a 0.2 - 0.4 mm nozzle.
You may have to work the threads a couple times to get smooth motion. Feel free to use PTFE grease or wax.
Blog Link: https://vedanshblog.netlify.app/bike-phone-mount/
Category: Sport & Outdoors
The author marked this model as their own original creation. Imported from Thingiverse.