Cord Hook for ProTeam ProCare 15XP Upright Vacuum

Print Settings:

Filament: Designed for PETG

Infill: 25%

Layer hight: First layer 0.2mm, Remaining layers 0.15mm

Nozzle: 0.4

Nozzles temp: First layer 235c, Remaining layers 245c

Bed temp: First layer 85c, Remaining layers 90c

Supports: Yes, Rectilinear

Print time: Approximately 1 hour 59 minutes 

Filament required: Approximately 3.42m

Works on 6 inch beds

Works on not heated beds, with the inclusion of a brim

These are the settings that I printed with and know work, but I encourage you to experiment with the settings in your slicer of choice.