Honeycomb Storage Wall (HSW) Tork Craft hex screwdriver holder
Honeycomb Storage Wall (HSW) Tork Craft hex screwdriver holder
27
227
1
829
updated
December 18, 2023
Description
PDF- Will hold any screwdrivers that measure less than 16mm (diameter) in the thin section where it hangs.
- Requires 2 empty inserts to be printed.
- There are 2 versions: one with a slight angle inwards, to prevent the driver from falling out, and a flat one that will have a better looking top surface.
- Obviously requires a storage wall: https://www.printables.com/model/152592-honeycomb-storage-wall
Model origin
The author marked this model as their own original creation.