Christmas LED House

A small 170*110*156mm house in 2 parts for easy handling and printing.

There are two versions of the walls: one with two slots inside to accommodate a tealight diameter, and one without in case you find it unnecessary.

This model is designed to allow cone-shaped incense smoke to pass through the chimney hole. It is also designed to be printed in white, for transparency.

! WARNING ! If you intend to use incense, you do so at your own risk. There is fire hazard. Do not use PLA, as the smoke is hot enough to deform the structure, PETG should suffice (as I did), ABS is the best to my knowledge. Do not let the incense come into contact with the plastic. I used baking paper and aluminum foil to preserve the structure underneath (don't skimp on the quantity, but don't let the baking paper come into contact with the incense either).

Printing:

• I recommand 0.4mm nozzle (the thinner walls are 0.4mm thick)
• Make sure your nozzle isn't clogged (to avoid the slight defects I've noticed, particularly around windows)
• For best results, use 3 wall lines for optimum transparency
• Only the roof needs supports for the chimney (unless your printer is ok with bridging, which is not my case)
• Printing with a 0.3 mm layer height reduces printing time but does not reduce overall quality (as I did)

This is my first published model, I hope you like it!