K1 Toolhead Cover Thumb Screw

I was feed up to always had to use and find the right Allen key to be able to remove the toolhead cover. So I made this thumb screw to facilitate its removal. It's quick and easy now :)
 

❗ Disclaimer  

Most of the thumb screw versions are interfering with the AI Camera. So I recommend  you to install the M3 x 4mm SHCS version if you have a camera installed.

Different sizes and types of screws possible. 

2x M3 x 4mm SHCS - DOES NOT Interfere with the camera footprint  - Super glue needed 
2x M3 x 6mm SHCS - Interfere with the camera footprint  - Super glue needed
2x M3 x 8mm SHCS - Interfere with the camera footprint - Super glue needed
2x M3 x 6mm HHCS - Interfere with the camera footprint 
2x M3 x 8mm HHCS - Interfere with the camera footprint 

 🖨 Recommended Print Settings.

Material :  PETG/ASA/ABS

Layer height : 0.1
Wall count :  3
min Top/bottom thickness : 0.8 mm
Infill : 30% 

No Support

Demo - Fast nozzle change

Extra modifications on the toolhead

Extra modifications on the sock

🪵 Change Log

22 December 2023

Multiple screws options added

17 December 2023 
First release 

☕ Want to support me ?

Enjoy this model? Your support means the world to me! If you love what I do, remember to like and rate the model. You can also follow me to get the latest updates. 
If you wish to further help me to fuel future projects, consider buying me a coffee, I'm literally running on those! Every cup counts and is immensely valued.