modified filiment clip 95 to remove spool clip

I really like this filament clip design. It is the best I've seen as it is easy to use, holds well etc.

However I wanted to use it in a slightly different way. I have a lack enclosure that has filament fed to it via ptfe tubes coming out of dryboxes. If the filament slips back into the tube it is a real pain. I originally tried other peoples designs and tried to make my own but in the end decided this is still the best filament clip ever I just didn't need the spool holder part.

I lazily used slicer to cut off the spool holder part and voila!

Printed with pla as the glass point of 60c is much warmer than the top of my enclosure will ever see.

Print Settings

Printer Brand:

MK3

Printer:

Prusa i3

No

Supports:

No

.2

Infill:

20 percent

Notes:

I really like this filament clip design. It is the best I've seen as it is easy to use, holds well etc.rnrnHowever I wanted to use it in a slightly different way. I have a lack enclosure that has filament fed to it via ptfe tubes coming out of dryboxes. If the filament slips back into the tube it is a real pain. I originally tried other peoples designs and tried to make my own but in the end decided this is still the best filament clip ever I just didn't need the spool holder part.rnrnI lazily used slicer to cut off the spool holder part and voila!rnrnPrinted with pla as the glass point of 60c is much warmer than the top of my enclosure will ever see.