FPV Drone Wall Hanger (3M Command Strip) [New Design available]

V2 is now available here

Features

• Wall hanger for 3" or larger quads (check your dry weight vs single 3M Command strip max load)
• Uses single 3M Command Strip

Print Settings

• Printer: Creality Ender 3
• Filament material: PLA
• Resolution: Default or finer
• Wall Ordering: Outside to Inside
• Supports: No
• Infill: 40%
• Infill Pattern: Hexagonal/Tri-Hexagonal
• Nozzle Temp: 220°C
• Bed Temp: 50°C
• Print Speed: 100mm/s
• Rafts: Doesn't Matter
• Notes: Depending on your first layer quality, some sanding and cleaning might be needed for better adhesion. After sanding, rinse and dry. Use any tape to stick off excess dust/particle before applying 3M Command Strip