Ender 3 V3 SE / KE Z Belt Tensioner

Simple tensioner.

Need:

• x2 - M5x12mm Screws
• x2 - M3 Washers
• x1 - M3x20mm Screw
• x1 - 3mm Bore Pulley

Print Settings:

• 5 Walls/Top/Bottom
• 40%+ Infill
• PLA is fine

The M3x20mm screw that holds the pulley screws into plastic. No need for extra hardware here.

If you like my work consider buying me a ko-fi ☕😊 Your support is greatly appreciated.

github